2022 Ferris Industries ISX 800 61 in. Kawasaki 26 hp
2022 Ferris Industries ISX 800 61 in. Kawasaki 26 hp

Specs

General Information

Manufacturer
Ferris Industries
Ferris Industries
Model Year
2022
2022
Model
ISX 800 61 in. Kawasaki 26 hp
ISX 800 61 in. Kawasaki 26 hp
Model Code
5902022
5902022
Color
Red
Red

Body

Seat
Mid-back suspension seat with arm rests
Mid-back suspension seat with arm rests
Rollover Protection (ROPS)
180° foldable
180° foldable
Safety Features
Controls / Safety Group - Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit/adjustable twin steering controls
Controls / Safety Group - Seat activated engine kill, clutch safety switch, neutral and parking brake safety circuit/adjustable twin steering controls

Drivetrain

Transmission/Drive
Dual commercial Hydro-Gear® ZT-3400® transaxles with 7 in. cooling fans
Dual commercial Hydro-Gear® ZT-3400® transaxles with 7 in. cooling fans
Travel Speed
Ground Speeds - 0 - 10 mph
Ground Speeds - 0 - 10 mph
Travel Speed Forward
Ground Speeds - 0 - 5 mph
Ground Speeds - 0 - 5 mph
Drive Tires
23 x 10.5-12 in.
23 x 10.5-12 in.
Steering Tires
Caster - 13 x 6.5-6 in.
Caster - 13 x 6.5-6 in.
Axles
1.125 in.
1.125 in.
Parking Brake
Hand operated Internal transaxle
Hand operated Internal transaxle

Electrical

Instrumentation
Dual-function hour meter, fuel level gauge in tank
Dual-function hour meter, fuel level gauge in tank

Engine

Engine Make
Kawasaki®
Kawasaki®
Engine Model
FT730V - EFI
FT730V - EFI
Cylinders
2
2
Horsepower

26 hp

All power levels are stated gross horsepower per SAE J2723 as rated by Kawasaki.

26 hp

All power levels are stated gross horsepower per SAE J2723 as rated by Kawasaki.

Displacement
726 cc
726 cc
Starter
Electric
Electric
Fuel Type
Gasoline
Gasoline
Fuel Capacity
5.5 gal.
5.5 gal.

Measurements

Length
Overall - 83 in.
Overall - 83 in.
Width

Overall Deflector Down - 75 in.

Overall Deflector Up - 63.5 in.

Overall Deflector Down - 75 in.

Overall Deflector Up - 63.5 in.

Weight
Dry - 1,197 lb.
Dry - 1,197 lb.
Cutting Width
61 in.
61 in.
Cutting Height
1.5 - 5 in.
1.5 - 5 in.

Operational

Deck Construction
iCD™ Cutting System, 2-Belt
iCD™ Cutting System, 2-Belt
Spindles
Aluminum Greaseable
Aluminum Greaseable
Power Take-Off (PTO)
Electric
Electric

Other

Includes
Suspension - ForeFront™ Suspension System
Suspension - ForeFront™ Suspension System
Warranty

Engine - 3-Year limited manufacturer's warranty

Balance of Machine - 4-Year limited warranty (48 months) or 500 hours, whichever occurs first. Unlimited hours during the first 2 years (24 months). Coil-over-shocks and all suspension related components are covered for 5 years (60 months) unlimited hours. Coverage on other components varies, please see operator's manual for complete details

See operator's manual or dealer for complete warranty details. Refer to engine operator's manual for engine warranty

Engine - 3-Year limited manufacturer's warranty

Balance of Machine - 4-Year limited warranty (48 months) or 500 hours, whichever occurs first. Unlimited hours during the first 2 years (24 months). Coil-over-shocks and all suspension related components are covered for 5 years (60 months) unlimited hours. Coverage on other components varies, please see operator's manual for complete details

See operator's manual or dealer for complete warranty details. Refer to engine operator's manual for engine warranty

Features

Features

  • FOREFRONT™ SUSPENSION SYSTEM: The system utilizes four upper and lower control rods that ensure the front caster bearing remains vertical through the full range of travel. This controlled motion results in a smoother ride, more precise tracing of the terrain and an improved cut.
  • INTEGRATED TRANSMISSION: Commercial Hydro-Gear® ZT-3400™ transaxles, with 7" cooling fans, are designed for high performance and are fully serviceable.
  • EASY ACCESS: Quick removal of the floor pan provides convenient access to the top of the deck for easy cleaning and service.
  • ICD™ CUTTING SYSTEM: iCD™ Cutting System was engineered to produce the best possible cut in a multitude of conditions. The ISX™ 800 is equipped with a 2-belt deck and provides a 3-year belt limited warranty (See operator’s manual for complete warranty details).
  • MOWER SPINDLES: Cast-aluminum greaseable spindles feature 1” shaft with 2.5” x 1” dual ball bearings with top access grease fittings and pressure relief valve.
  • RIDE-ON MOWER WARRANTIES: Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.
  • MILES PER HOUR: Up to 10 MPH ground speed, reverse 5 MPH.

Features

  • FOREFRONT™ SUSPENSION SYSTEM: The system utilizes four upper and lower control rods that ensure the front caster bearing remains vertical through the full range of travel. This controlled motion results in a smoother ride, more precise tracing of the terrain and an improved cut.
  • INTEGRATED TRANSMISSION: Commercial Hydro-Gear® ZT-3400™ transaxles, with 7" cooling fans, are designed for high performance and are fully serviceable.
  • EASY ACCESS: Quick removal of the floor pan provides convenient access to the top of the deck for easy cleaning and service.
  • ICD™ CUTTING SYSTEM: iCD™ Cutting System was engineered to produce the best possible cut in a multitude of conditions. The ISX™ 800 is equipped with a 2-belt deck and provides a 3-year belt limited warranty (See operator’s manual for complete warranty details).
  • MOWER SPINDLES: Cast-aluminum greaseable spindles feature 1” shaft with 2.5” x 1” dual ball bearings with top access grease fittings and pressure relief valve.
  • RIDE-ON MOWER WARRANTIES: Coil-Over-Shocks and all suspension-related components are covered for 5 years (60 months), for unlimited hours. We are committed to providing performance, productivity and durability.
  • MILES PER HOUR: Up to 10 MPH ground speed, reverse 5 MPH.